新兴板

1、3mm 厚度即可达到防火要求。

2、耐潮湿佳，不变形，不返潮。

3、可贴、裁、钉、粘、漆、锯、刨，并可使用美工倒切割。

4、板身柔韧有弹性、可弯曲做各式造型。

5、可搭配各式面板、化妆皮或原木皮从事二次加工。

6、重量轻、搬运方便、破损率低、防水、防潮。

Xinxing Panel:

1、The 3mm thickness meets the fireproofing requirement.
2、Good moistness-bearing,not to distort or get damp.
3、Able to paste, cut, nail,stick,paint,sew,dig and use the
　 art design-ing kiife to carry on flitching.
4、The panel body is flexile and stretch,and be able to
　 curve to make all kinds of models.
5、Match with various types of faceplates ,face-painting
　 tegument,original wood tegument to reprocess.
6、Light weight convenient to carry ,low damaging rate,
　 watet-proof –ing ,moisture proofing.

纤维水泥板（硅酸钙板）

1、6mm 以上才能达到 A 级不燃材料的要求。

2、膨胀系数约 8/10000 ，吸水率略高（35 ％）。

3、板身为刚性，无法弯曲做各式造型。

4、只采取一般施工方式，难以二次施工和表明贴覆。

5、重量较重，搬运费力，破损率高。

6、多数产品含有石棉。

Floor Slab(calcium silicate board):

1、The thickness of over 6mmcan meet the A-level flame
　 –retardant material ‘srequirement.
2、The expansion coefficient is 8/10000,the water
　 –absorptivity is a little high (35%).
3、The board body is a rihidity ,unable to curve to make
　 various types of models.
4、Only can be constructed in one way, hard to reconstruct
　 or paste the cover on the surface.
5、Heavy weight ,hard to carry ,high damaging rate.
6、Most products contain the asbestos.

石膏板

1、厚度达 12mm 以上才能达到 A 级不燃材料的要求。

2、吸水性重，容易膨胀变形。

3、板身为刚性，无法弯曲做造型。

4、难以二次加工，表明的贴合性差，无法贴装饰层。

5、重量重，搬运费力，破损率高。

6、强度低，耐候性差，怕碰撞、怕水、怕潮、水浸则严重变形。

Plasterboard:

1、The thickness of over 12mm can meet the A-level flame
　 –retardant material's requirement.
2、Strong water-absorptivity,easy to inflate and distort.
3、The board body is a rigidity, unable to curve or sculpt.
4、Hard to reprocess,bad external jointing ,unable to paste
　 the decora-tion surface layet.
5、Heavy weight ,trouble to carry ,high damaging rate.
6、Low intensity,bad to bear the period of time ,sensitive
　 to be col-lided ,watered ,damp,easy to distort seriously
　 after water-immersing.